Related topics

Nvidia driver problems after recompile of kernel
The DVI out is flaky. Works fine at cold boot. After reboot is initiated, no video present in windows. Must cold boot for video in windows. Do you hear startup system sounds from Windows? -- Glen Ventura, MS MVP Windows, A+ http://dts-l.net/ http://dts-l.net/goodpost.htm Glen, Yes, it's actually booting.

Added SCSI to a full system- caused No POST on startup
Thorsten Matzner tmatz...@gmx.net microsoft public windowsxp newusers "Martin" <amezqu...@sbcglobal.net> wrote: by accident I disabled the video where you are given choices to startup in the system mode or disable it. I disabled and now when I boot up I get no video even after trying f8 Use the System Restore Tool.

No video or garbage in text mode after compiling new kernel
... the machine power up, the hard drive start clicking (after which it stopped completely), but I heard no startup chime or any other chime for that matter. And there was no video. Michael, the fact that you have the fan and other evidence of power supplly (like HD spin-up), but don't get the startup chime,

ALT+TAB to switch apps no longer works.
Just to see what happened, I tried to change my multiplier from auto (which in my case is 11.5) to 11, and rebooted. Now nothing happens. The computer turns on, and harddisk and fans are getting power etc., but no beep and no video signal. What do I do?? How do I change it back?? Please Help!! David.

No Video after disabling it within system properties
There is no POST. No video signal comes out at all. Nothing else is installed, except a floppy. I disconnected the hard drive and CD-ROM. I just want to get into the Initially, after the first installation, the system started to boot, the video came on, and the LED said "26" (I think). After a few seconds it

Bug#468439: xserver-xorg-video-intel: Backlight not re-activated ...
I had an odd problem where the CPU fan was dragging down the whole system after a CPU swap out. Have you tried powering it up with the CPU fan unplugged? Startup tone, drive spins, no video Problem with video controller. Powers on, no tone. Logic board problem. High Tone, four higher tones. Problem with SIMM.

Bug#465268: xserver-xorg-video-intel: No display at all when ...
(sorry about grammar) Tony Clixby <tony.cli...@ntlworld.com> wrote: My SoundblasterPCI128 card failed on me so I fitted an Audigy card All seemed well for a few hours When I switched on my PC the following day it world not POST or boot Cleared the CMOS Removed all but video card Still no boot Replaced video card

BIOS flashing problem
After months of taking 2 or 3 tries to boot (good a "no video signal" error message and never saw a boot screen), it finally would not boot at all. Heartily agreed after my failed attempt to desolder and resolder caps to yet another bad gigabyte board... Ari -- spammage trappage: remove the underscores to reply

HELP: Computer won't boot After Installing PCI Sound Card.Thanks
When I power the system on, the floppy, cd-rom and hard drive are accessed, but there is no video whatsoever. After a few seconds the hard drive stops spinning but the floppy and cd-rom lights blink indefinitely and there is no other activity regardless of how long I leave the system on. Beep codes would be helpful

S1563 won't boot up after power off
... 300W PSU ATI Radeon IBM 60GB HDD WD 80GB HDD New system, not overclocked, seems to run normally after a successful boot, but: The first time I started it I got no video. After several attempts, however, it will start up normally and boot. Actually this doesn't seem to be tied to the number of boot attempts,

PD440FX no boot up after BIOS upgrade...HELP!!!
Mainboard is loose and sits on a big fat envelope on the table so no shortcuts to case for sure ! (Okay whole computer was first assembled but of course not lucky enough for the first time) I am lost. I just won´t accept that it is broken, after so many DIY PC´s this would be first one.

Which Video Card?
mark goo...@markwoods.org alt comp periphs mainboard msi-microstar google@markwoods. org (mark) wrote in message news:<9b1cc268.0309231803.3e1ee...@posting.google.com>... I removed my northbridge fan in order to stop the horrendous buzzing. Before I could install the new heat sink, I tried booting and I get nothing

A7V333: odd crash, now unable to access hard disks at boot time
Still using the old Trident PCI video card, Seagate hard drive, floppy drive, case, and power supply. Initially everything seem to work OK. Then, right before the customer came to pick up the computer, I plugged it in again after it had sat for a few days, and it failed to boot. No video display, no POST beep.

Reinstall Windows
No dump d o i386/93989 i386 [install] Can't install FreeBSD from IEEE1394 DVD-RW o o i386/94141 i386 [iwi] iwi doesn't work on Acer Laptop o i386/94364 i386 [kbd] not moving after switching with StarView SV411 K o i386/102410 i386 [install] FreeBSD 6.1-RELEASE installation boot freeze o i386/102562 i386 [em] no

ATI 8500DV no video signal after WinNT startup
On my computer, sometimes it would boot up fine and at other times the fans would come on, but no beeps and no video. Eventually after many attempts it would come and and all BIOS setup information would be lost and the date and time would be wrong. One time I got a checksum error message just after it came back on

vista black screen hang
That is, once the system boots the video sub-system works perfectly. There is no sign of a power overload at any time after boot. When the problem occurs the system I suspect that your ups isn't big enough to start the load, some monitors and some high-end computers draw a lot of power especially on startup.

PM 7500 No Startup Chime, No Video, No Nothing
My video card is nVidia Quadro NVS 135M. "John Barnes" wrote: If the hang is between the scroll screen and startup screen, you should try to roll back or update to a On my DELL notebook with 4GB RAM after login screen my system hangs with a black screen, no mouse cursor and keyboard leds (CAPS, SCROLL,

Lousy Service Rant
My computers come on, then "LOCK". after they lock, you have to disconnect the power. power button does not help. When trying to restart the computer, nothing.... no beeps .. no video... no nothing. However; the fan on the processor spins and so dowes the power supply. The video card says " NOSIGNAL" on the monitor

Keyboard lights blink, no video
stop this test procedure else /* mobo beep, no video with NKW video card */ Report Post Test results { describe the beeping sounds made during startup as a sequence but POST test doesnot occur */ if cpuheatsink is hot after a few minutes of power the CPU is most likely using electricity and operational then the

no video/boot after removing NorthBridge fan from KT3
Athlon 1800+ 512mb DDR Nothing else attached apart from generic TNT video card No video signal Hard and froppy drives removed - bits everywhere PS All fans Especially as youre getting no video signal it is possible that you may have disturbed the seating of this card. Remove the screw, remove the video card and